Find a stockist
From selection to installation

The detail
makes the difference.

A beautiful surface begins with a considered plan. Explore the material information, compare formats and prepare each stage of installation.

Material. Dimensions. Finishing.
Romanite — MS-167 — curved restaurant wall, visualisation
Romanite · MS-167Visualisation / inspirationView this panel
01

Composition

The general technical material sheet specifies modified clay material. This term describes the material base. The sheet does not specify percentages of clay, other minerals or binders.

Travertine, concrete and wood looks describe the appearance. They do not mean the panel consists of solid travertine, concrete or wood.

02

Dimensions & weight

3000 × 1200mm
1200 × 600mm
900 × 600mm

Schematic proportions. Availability varies by panel and colour variant.

Flex-Surfaces offers three standard sizes: 3000 × 1200, 1200 × 600 and 900 × 600 mm. Available sizes are listed for each colour variant on the product page. Discuss your panel layout with a stockist.

Before installation, also request the variant’s thickness, weight and dimensional tolerance. Do not use the dimensions of another panel as your starting point.

Discover the panel collection
03

Substrate & installation

From preparation to finishing.Explore the steps in the installation guide.

The material sheet specifies acrylic adhesive or an equivalent system, but does not provide a complete installation manual. The choice must be coordinated with the panel, substrate and application.

Discuss before starting

  • The load-bearing capacity, flatness, moisture condition and adhesion of the substrate.
  • A suitable, confirmed adhesive system and preparation of the support.
  • Panel direction, cutting plan and joint layout.
  • The finishing of corners, edges, openings and junctions.
  • For curves: the panel’s permitted radius and bending direction.

The available sources do not specify a minimum bend radius, installation temperature or fixed installation time. Have these details confirmed for the selected product.

04

Inside, outside & moisture

A design image is not technical approval. Assess the complete application, including fixing, substrate, moisture exposure, movement and junctions.

A panel does not replace a waterproofing system. For a shower, request confirmation for direct water exposure. An exterior wall requires assessment of the façade construction and local exposure.

Wall cladding is not automatically suitable as flooring, a worktop or cladding near a heat source.

Read the considerations for each application
05

Maintenance

Cleaning requirements depend on the finish and use. Request the maintenance instructions for the selected product code.

Have the cleaning product and method assessed in advance. Try the confirmed method on a loose sample first. The general technical sheet is not a complete maintenance guide.

06

Test results & documentation

The technical sheet below is a general material overview. It provides no date, test laboratory, report number or individual tested product codes. Its scope for a specific variant has therefore not been established.

Use this summary as a starting point for discussion. Where a performance requirement applies, request the original report, applicable product codes and tested build-up.

Fire performance

The available sheet lists a classification alongside Chinese test methods. As its validity and product-specific scope have not been established, we do not present it as a confirmed fire classification for the collection. Have the classification required for your project checked against the original report.

Available downloads

Technical material sheetEnglish · PDF · 1 page · general material overviewTechnical material sheetSpanish · PDF · 1 page · general material overview

Source: Habitat-One technical material sheet. The original document title and supplier references have been retained for traceability.

The collection on paper

The material books.

The current collection in a carefully curated material book. Explore all 133 colour variants, with article codes, panel images and available sizes.

Flex-Surfaces catalogue cover — English
Material Book / 2026

English edition

PDF · 49 pages · Sizes updated on 21 October 2026

Download catalogue
Flex-Surfaces catalogue cover — Spanish
Material Book / 2026

Spanish edition

PDF · 49 pages · Sizes updated on 21 October 2026

Download catalogue

The catalogues present the current panels and sizes for each colour variant. Compare the images with a physical sample at a stockist. The three standard sizes are 3000 × 1200, 1200 × 600 and 900 × 600 mm.

A clear answer

Frequently asked questions.

What are Flex-Surfaces panels?

Flex-Surfaces panels are flexible decorative coverings in a range of colours and textures. The collection includes stone, travertine, concrete and wood looks. Read about the material ↗

What are the panels made of?

The available general material sheet describes modified clay material. It gives no percentages for its constituents. A wood or stone look describes the appearance, rather than a solid wood or natural stone composition. Explore the material ↗

Which colours and textures are available?

The collection comprises 37 panels and 133 variants. Filter by texture family or colour group; the product page shows the colour, product code and matching images. Discover the collection ↗

Can the panels be applied around a curve?

Yes, the panels can be used to follow a curve. The achievable radius varies with the finish, thickness and bending direction. Check your intended curve with a sample and match the installation method to the selected variant. Explore curves and columns ↗

Can the panels be installed over existing tiles?

Yes, the panels can be installed over existing tiles. Make sure the tiles are firmly bonded and the surface is clean, dry and level. Match the preparation and adhesive to the existing tiled wall. Read about renovation ↗

Which panels are suitable for exterior use?

For a facade, choose a panel and fixing system suitable for exterior use. Your stockist can help identify the right variant for the substrate, facade construction and exposure to the weather. View exterior application requirements ↗

What requirements apply in a bathroom?

Choose the finish for its position in the bathroom. A wall outside the shower faces different conditions from a shower wall. In wet zones, the substrate, waterproofing, adhesive and joints must form a suitable system; the panel does not replace waterproofing. Read about bathroom walls ↗

How are joints and corners finished?

A considered result starts with a layout plan. Decide the pattern direction, joint spacing and corner details before installation. Use joint and edge finishes suited to the selected panel and its application. Read about installation and junctions ↗

How are the panels cleaned?

Follow the care advice for your chosen finish. The surface and relief determine which cleaning method is suitable. Test a recommended product on a separate sample first, and keep adhesive, grout and paint off the visible face during building work. Read about maintenance ↗

Where can I see the material in person?

Habitat-One in Jávea / Xàbia is the first stockist and has a showroom. Visits are by appointment. Ask in advance which panels or samples you can view. View stockist ↗

Warm light on a sand-coloured wall — inspiration image
From image to experience

Experience the material
up close.

Find a stockist for information about the collection and the possibilities for your project. Check each location for available panels and displays.

Find a stockist
Habitat-One · Jávea / Xàbia, Spain · Showroom available
Visualisation / inspiration